Before & After Gallery - Marsh Water Damage Dallas

Damage Restoration Before & After in Dallas, TX

Any restoration company can tell you they do good work. Seeing it is different. The photos below show real Dallas jobs we’ve handled at Marsh Water Damage Dallas: flooded kitchens dried back to spec, mold removed from attics and crawl spaces, storm-damaged rooms rebuilt corner to corner. No stock photos, no staging. Just what a structure looked like when we arrived, and what it looked like when we packed up. The difference is the point.

Call (432) 529-4284

Recent Transformations

Burst Supply Line in a Lake Highlands Kitchen

The problem: a braided stainless supply line under the kitchen sink burst around 2 a.m. and ran until the homeowner woke up. Water had traveled through the cabinet bases, into the hardwood flooring, and wicked 18 inches up two walls of drywall. Our crew arrived with commercial extractors, pulled the baseboards and lower cabinet toe-kicks, and set Dri-Eaz dehumidifiers with an air-scrubber running to protect the rest of the house. Psychrometric readings (measuring the moisture in the air and materials) told us when the structure was genuinely dry, not just dry on the surface. The result: the kitchen floor was saved, the cabinet boxes dried in place, and the homeowner avoided a full cabinet replacement that a less patient drying plan would have forced.

Sewage Backup in a Bishop Arts Basement

The problem: after a spring storm overwhelmed the city line, a finished basement in Bishop Arts took on several inches of sewage-tainted water. That’s not a mop-and-fan situation. Our technicians removed the contaminated carpet and pad, cut the affected drywall, and treated the concrete and framing with an antimicrobial process before drying began. The written price covered every step before demolition started, so the homeowner knew exactly what the job would cost. The result: a clean, dry shell that was ready for new flooring and fresh drywall, with air samples confirming the space was safe to reoccupy.

Attic Mold from a Slow Roof Leak in Casa View

The problem: a small flashing failure near a roof valley had been leaking slowly for months, and by the time it showed up as a ceiling stain in the hallway, the attic was growing mold across a wide section of sheathing. Mold likes Dallas attics because our summers cook the moisture out of the air but leave the wood damp enough to feed spores. We contained the attic, removed the affected insulation, and sanded and treated the framing. Every technician on the job was background-checked, identity-verified, and sent to the customer by name and photo before the visit. The result: the attic passed clearance testing, and the homeowner got a dry, mold-free space with new insulation and a fixed flashing detail.

Flash Flood Damage in a Garland Road Split-Level

The problem: a split-level near the Garland Road corridor took on a foot of muddy water when White Rock Creek jumped its banks during a fast-moving thunderstorm. The lower level had carpet, a finished laundry room, and stored belongings. We extracted standing water the same day, removed the saturated materials, and set commercial drying equipment from Dri-Eaz, Phoenix, and XPOWER throughout the affected rooms. Every job gets a written price before any work begins, and this one was no exception: the homeowner saw the full extraction and drying scope in writing before we pulled the first inch of carpet. The result: a fully dried lower level with no secondary mold, ready for rebuild, with photo documentation provided for the insurance claim.

Water Heater Failure in a Preston Hollow Utility Room

The problem: a 50-gallon water heater in a Preston Hollow utility room rusted through at the base and emptied itself across the room and into the adjacent hallway. By the time our crew arrived, water had soaked into the vinyl flooring underlayment and traveled under the baseboards into two adjoining rooms. The technician team extracted what was standing, then pulled the baseboards and drilled small drying holes behind them to let air circulate through the wall cavities. It’s a trick that keeps drywall intact while still drying what’s behind it. The result: clean drywall, no tear-out beyond the utility room floor, and a structure that tested dry in three days instead of a two-week rebuild.

Crawl Space Mold and Standing Water in Mesquite

The problem: a Mesquite homeowner noticed a musty smell coming through the floorboards and called us to take a look. Under the house, we found standing water from a pinhole plumbing leak, along with mold established on the floor joists and subfloor. A marsh is low, wet ground, water where it shouldn’t be. That’s what this company deals with every day, and the name says so. We pumped the standing water, removed the vapor barrier, treated the joists, and installed a new barrier before the drying equipment went in. The result: a crawl space that finally smelled like nothing at all, with the joists treated and the source leak repaired so the problem couldn’t quietly return.

Want Results Like These?

If your house is under water, growing mold, or torn up from a Dallas storm, the quickest way to get it looking like the “after” photos above is to call (432) 529-4284. A live person answers at any hour, every day of the year. We’ll send a background-checked, photo-badged technician with a written price before any work begins. That’s the Threshold Standard on every visit, and it never changes.

Written by Tobias Reyner, Owner at Marsh Water Damage Dallas, serving Dallas since 2005.